Press Release: New Heat Deterrents

Floor & Tunnel Shield II

Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  It provides excellent light weight thermal protection, acts as a guard against road debris, and provides sound deadening as well.

Constructed with an embossed 10 mil aluminum face bonded to 1/8″ composite glass-fiber core and backed with a high temp, super strong, pressure sensitive backing, it withstands up to 1750ºF of direct continuous heat. The adhesive side holds past 450ºF. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16″ thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

.83 sq. ft.(10″ x 10″) 231-904 $11.99

3.5 sq. ft(2′ x 21″) 231-901 $45.99

7 sq. ft.(4′ x 21″) 231-902 $91.99

14 sq. ft.(4′ x 42″) 231-903 $181.99

(PRICES LISTED CURRENT TO AUGUST 2017. May vary at a later date.)


Muffler Shield Kit

The Best muffler shield/wrap on the market. Based off our proven Floor and Tunnel II heat shield, our new Muffler Shield is designed to wrap around just about any size muffler. Includes our tough Stainless Steel positive locking ties for a tight secure installation. Made from 10mil dimpled aluminum with a 1/8″ needle glass insulator it can be easily trimmed to fit most mufflers. Greatly reduces radiant heat coming off your muffler resulting in a cooler interior and protection from damaging heat.


• Greatly reduce radiant heat from muffler

• Cooler interior

• Protect from damaging heat

• Kit includes:

› One – 42″ x 24″ Muffler Shield

› Four – 40″ x 1/2″ Locking Ties

› Locking Tie Tool

Muffler Shield Kit 231-900 $55.99

(PRICES LISTED CURRENT TO AUGUST 2017. May vary at a later date.)



Made from 10mil dimpled aluminum with a 1/4″ high temperature basalt insulation, Form-A-Shield can withstand direct temps to +1400ºF. Form-A-Shield can be applied directly to hot surfaces and molds easily to exhaust manifolds, pipes and mufflers.

Form-A-Shield – (21″ x 48″) 231-905 $91.99

(PRICE LISTED CURRENT TO AUGUST 2017. May vary at a later date.)


Founded in 1948, Moss Motors is the oldest and also the largest supplier of parts for classic British sports cars with warehouses on both the east and west coasts in the USA. Moss is a service driven company by virtue of its knowledgeable salespeople, responsive Customer Service Department, and available technical support. Moss products are supported by engineers, quality control, and R&D, and as a result, parts from Moss are backed by the best warranty in the business. Moss offers free printed catalogs for Austin-Healey, MG and Triumph vehicles. A Jaguar parts catalog is available online only. Shopping online is easy and convenient at For more information, visit the Moss Motors website or call 1-800-667-7872.

Moss Motors
440 Rutherford Street, Goleta CA 93117

'Press Release: New Heat Deterrents' has no comments

Be the first to comment this post!

Would you like to share your thoughts?

Please note: technical questions about the above article may go unanswered. Questions related to Moss parts should be emailed to

Your email address will not be published.

© Copyright 2022 Moss Motors, Ltd. All Rights Reserved.