You can replace a ring gear if want to give it a try, you probably have everything it takes to do the job. To get the old ring gear off, take a hack saw, torch or cut off wheel and start to cut through it, don’t cut all the way through, and for sure don’t…
Clutch problems fall into three categories: a) The clutch does not release properly when the pedal is depressed, resulting in difficult engaging of gears. b) Clutch slip, a condition where the engine speed increases when you give the car gas while in gear, but the car does not speed up accordingly. c) Clutch judder, where…
Insert your clutch alignment tool through your new clutch disc, push the tool into the pilot bushing in the crankshaft, then press the disc up flat against the flywheel. Locate the new pressure plate on the dowel pins, install the bolts just a couple of turns each. Now, by exerting appropriate sideways pressure on the…
