Letter to the Editor – MGB Window Seals

I just completed reading your article in Motoring (Vol.3 No.3) on installing MGB window seals.

I just completed this task on my 1969 MGB Roadster and found that by simply removing the padded stop blocks in the bottom of the doors (channel rests on when rolled all the way down) you can roll window down farther, letting you drill out rivets and replacing seal without removing glass.

In my case I was repainting my car so did remove vent windows to install new rubber seals. But it shouldn’t be necessary in either case to remove window glass. Hopefully I can save someone some labor time. Bill Cowieson, Riverside, Ca.

(Now why didn’t we think of that..? Ed.)